Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Honda CR-V?

Model: Honda CR-V MK 4 - Years 2012-2017
Part:

In this tutorial, we can see how to reset the tire pressure light in the Honda CR-V, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the passenger compartment, then insert the key and turn on the instrument panel. Next, locate the button with the icon of the specific light on the left side of the dashboard, press it and hold it in position for the necessary time for the light to disappear from the panel.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the Honda CR-V
How to reset the tire pressure sensor on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) In a few simple steps, we will see how to reset the tire pressure warning light on the Honda CR-V; before resetting the TPMS sensors, it is necessary…
How to reset the tire pressure warning light on the Honda CR-V
How to reset the tire pressure warning light on the Honda CR-V
Honda CR-V (2023-2026 / MK 6, RS) Today we will discover the instructions on how to reset the tire pressure warning light on the Honda CR-V; before resetting the TPMS sensors, it is n…
How to reset the tire pressure light in the Honda CR-V?
How to reset the tire pressure light in the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) .. In this tutorial we can see how to reset the tire pressure light in the Honda CR-V, an extremely simple and quick operation, to be.. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos