Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear headlight bulb of a Honda Accord?

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlight bulb of a Honda Accord, you need to start by opening the trunk to access the inside of the headlight. The first thing to do is to remove the cover or panel that protects the back of the headlight, usually fastened with clips or screws.

Once removed, you will have visibility on the connectors and the bulb holder. Carefully disconnect the electrical connector connected to the burnt out bulb.

At this point, rotate the bulb holder counterclockwise to remove it from the headlight. When you have the bulb holder in your hand, remove the faulty bulb by simply pulling it out of its housing.

Take the new bulb, being careful not to touch the glass with your fingers to avoid leaving oil residues that could compromise its lifespan. Insert the new bulb into the bulb holder, making sure it is securely in place, and reinsert the bulb holder into the headlight, rotating it clockwise until it locks into position.

Reconnect the electrical connector and reassemble the panel or cover. Finally, check that the new bulb works properly by turning on the rear lights.


Posted on 24 April 2025 by ScegliAuto


Related tutorials

Honda Accord (2008-2013 / MK 8) To replace the rear light bulb on the Honda Accord, open the boot to access the luggage compartment. You will need to detach the rivets securing the …
Honda Accord (2002-2007 / MK 7) In this very brief video guide, you will see the step-by-step procedure to replace the dipped beam bulbs on a Honda Accord, seventh generation model …
Honda Accord (2012-2017 / MK 9) To replace the front headlamp bulb on a Honda Accord, open the bonnet to access the rear of the headlamp corresponding to the bulb to be removed. Dis…

Other guides you may be interested in

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos