Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the headlight of a Honda Accord

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight

See other generations:
Video tutorial

Today we will see how to replace the front headlight of a ninth series Honda Accord. Let's start the procedure by opening the front hood of the car and removing the radiator grille by unclipping the clips that hold it in place.

Then we unscrew the screws that fix the bumper inside the wheel arches and detach its fastening clips on the underbody, then remove it as shown in the video. Once this is done, with a 10mm wrench, we unscrew the three screws that hold the headlight in place along its edge and unclip the fastening clips, now we can remove the headlight from its seat, disconnect the bulb connectors and finally remove it completely to replace it with a new one following the reverse procedure.


Posted on 17 May 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a Honda Accord
Replacing the Front Headlight Bulb on a Honda Accord
Honda Accord (2002-2007 / MK 7) Today, we will see in this video tutorial how to remove and replace the front headlight bulb on a Honda Accord, following these simple and quick step…
How to Replace the Front Headlamp Bulb on a Honda Accord?
How to Replace the Front Headlamp Bulb on a Honda Accord?
Honda Accord (2012-2017 / MK 9) To replace the front headlamp bulb on a Honda Accord, open the bonnet to access the rear of the headlamp corresponding to the bulb to be removed. Dis…
How to Replace the Window Switch on a Honda Accord
How to Replace the Window Switch on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you can start, open the front door of your Honda Accord. Begin by prising out and lifting the window switch panel using a flathead screwdriver…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos