Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radiator on the Honda Civic?

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Radiator

See other generations:
Video tutorial

To replace the radiator on the Honda Civic, open the bonnet to access the engine bay and disconnect all hoses and connectors attached to the radiator. To remove some hoses, you may need to detach their retaining ring.

Next, remove not only the old radiator but also its fan by loosening all the fixing bolts that secure the two parts. The fan must also be installed on the new radiator before fitting it into the engine bay. Once the fan is installed, insert the radiator into the engine bay, connect it to the connectors, and secure it with the appropriate screws.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Removing Radiator on Honda Civic
Removing Radiator on Honda Civic
Honda Civic (2001-2006 / MK 7) How do you remove the radiator on a Honda Civic? Start by taking off the front bumper to access the radiator. After removing the bumper, proceed to d…
How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic
How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic
Honda Civic (2016-2021 / MK 10) On the Honda Civic, resetting the Tyre Pressure Monitoring System (TPMS) is done with the vehicle stationary, with pressures adjusted to the values i…
How to Remove the Front Bumper on a Honda Civic?
How to Remove the Front Bumper on a Honda Civic?
Honda Civic (2001-2006 / MK 7) In this tutorial, you will see how to remove the front bumper on a Honda Civic. You will need a 9/32" socket, an 8mm socket, and a couple of screwdri…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos