Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Warning and Calibrate the Pressure on the Honda Civic

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

On the Honda Civic, resetting the Tyre Pressure Monitoring System (TPMS) is done with the vehicle stationary, with pressures adjusted to the values indicated on the door pillar. Turn the ignition to ON with the engine off. Use the controls on the Honda Civic's dashboard to enter the vehicle settings and select the tyre pressure/TPMS section.

Start the calibration (or reset) and confirm the reset of the warning. Once completed, turn off and then turn on the ignition of the Honda Civic to check that the warning light is no longer active; complete the calibration with a short drive at a constant speed to allow the system to update the values.


Posted on 22 June 2026 by ScegliAuto


Related tutorials

How to reset the TPMS light on a 2014 Honda Civic
How to reset the TPMS light on a 2014 Honda Civic
Honda Civic (2012-2015 / MK 9) The TPMS warning light activates on a Honda Civic vehicle when the tire pressure is not within the guidelines. This can happen due to tire wear from …
Resetting the TPMS light on the Honda Civic.
Resetting the TPMS light on the Honda Civic.
Honda Civic (2016-2021 / MK 10) Today's instructions will show us how to reset the tire pressure warning of the Honda Civic; before resetting the TPMS sensors, it is necessary for a…
How to reset the tyre warning light on a Honda Civic?
How to reset the tyre warning light on a Honda Civic?
Honda Civic (2012-2015 / MK 9) In this tutorial, you will see how to reset the tyre warning light on a Honda Civic, a very simple and quick operation, to be performed only after re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos