Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Honda Accord

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight bulb

See other generations:
Video tutorial

In this very brief video guide, you will see the step-by-step procedure to replace the dipped beam bulbs on a Honda Accord, seventh generation model produced from 2002 to 2007. First, open the front bonnet of the vehicle, then locate the dipped beam bulb situated at the back of the front headlamp as shown in the video.

Once you have located the bulb to be replaced, disconnect its connector, then rotate it anti-clockwise and remove it. After that, follow the reverse procedure to fit a new bulb and complete the job.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to adjust the headlights on a Honda Accord?
How to adjust the headlights on a Honda Accord?
Honda Accord (2012-2017 / MK 9) In this tutorial, you will see how to adjust the headlights on a Honda Accord, a very simple and quick operation. First, park the vehicle in front of…
Replacing the Front Headlight Bulb on a Honda Accord
Replacing the Front Headlight Bulb on a Honda Accord
Honda Accord (2002-2007 / MK 7) Today, we will see in this video tutorial how to remove and replace the front headlight bulb on a Honda Accord, following these simple and quick step…
How to Replace the Rear Light Bulbs on a Honda Accord
How to Replace the Rear Light Bulbs on a Honda Accord
Honda Accord (2012-2017 / MK 9) Replacing the rear light bulbs on a Honda Accord is a very simple and quick operation. First, open the boot and locate the indicated plastic rivets, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos