Do it yourself
Frequently asked questions about cars and motorcycles

Reset of the tire pressure monitoring system (TPMS) indicator for the Honda Civic.

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

Below we will see the instructions that will allow us to reset the tire pressure warning light on the Honda Civic. Before performing the reset of the TPMS sensors, it is necessary for all four tires to be at the correct operating pressure.

So, let's get in the car and start by turning on the instrument panel; from the central display, we will go to the vehicle settings and then to the TPMS calibration option, as shown in the video. At this point, we will perform the recalibration of the TPMS sensors, thus resetting the warning light on the instrument panel!


Posted on 25 December 2025 by ScegliAuto


Related tutorials

Honda Civic (2016-2021 / MK 10) In this brief guide, learn how to reset the tyre pressure warning light on a Honda Civic; before recalibrating the TPMS sensors, ensure that all four…
Honda Civic (2016-2021 / MK 10) On the Honda Civic, resetting the Tyre Pressure Monitoring System (TPMS) is done with the vehicle stationary, with pressures adjusted to the values i…
Honda Civic (2012-2015 / MK 9) These short and simple steps will illustrate the procedure for resetting the Tire Pressure Monitoring System (TPMS) light on the Honda Civic; before …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos