Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Honda Civic

Model: Honda Civic MK 7 - Years 2001-2006
Part: Door trim panel

First, remove the small triangular trim next to the window using a plastic wedge. Remove the cover panel near the opening handle and unscrew the screws underneath, then unscrew the screw located in the door pocket. Disconnect the opening handle by detaching the cable, as shown in the video. Remove the central pocket and unscrew the now exposed screws, then detach the window winder and you can proceed to remove the panel. To do this, simply lever with a wedge or flat screwdriver all around the surrounding gap while simultaneously pulling the panel.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Honda Civic
How to Remove the Door Panel of a Honda Civic
Honda Civic (2001-2006 / MK 7) Before starting, open the front door of your Ford Fiesta. Begin by prising out and removing the inserts from the door panel. Next, unscrew and remove…
Removing the Front Door Panel on the Honda Civic
Removing the Front Door Panel on the Honda Civic
Honda Civic (2006-2012 / MK 8) Today, you will learn how to remove and replace the front door panel on the Honda Civic. First, open the front door of the vehicle and start prying o…
How to Remove the Window Winder Handle on a Honda Civic
How to Remove the Window Winder Handle on a Honda Civic
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos