Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Honda Civic

Model: Honda Civic MK 9 - Years 2012-2015
Part: Door trim panel

Remove the small plastic cover near the opening handle and unscrew the bolt underneath. Repeat the same procedure with the bolt that secures the cover of the door handle/armrest. There will also be bolts underneath this cover. Now, remove all the covers and unscrew all the bolts securing the panel to the door around the entire area. While extracting the panel, be careful of the connectors and disconnect them. This is a very simple operation and accessible to everyone, even those with less experience.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Honda Civic
How to Remove the Door Panel of a Honda Civic
Honda Civic (2001-2006 / MK 7) Before starting, open the front door of your Ford Fiesta. Begin by prising out and removing the inserts from the door panel. Next, unscrew and remove…
Removing the Door Panel on the Honda Civic MK8
Removing the Door Panel on the Honda Civic MK8
Honda Civic (2006-2012 / MK 8) In this brief video, you will see step-by-step instructions for removing the front door panel on the eighth generation Honda Civic in simple and quic…
Removing the Front Door Panel on the Honda Civic
Removing the Front Door Panel on the Honda Civic
Honda Civic (2006-2012 / MK 8) Today, you will learn how to remove and replace the front door panel on the Honda Civic. First, open the front door of the vehicle and start prying o…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos