Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement

Model: Honda Civic MK 7 - Years 2001-2006
Part: Windshield wipers

To replace the wiper blade, start by removing the cap at the joint between the support and the arm. Sometimes this operation can be tricky as dirt and weather elements may have jammed the tabs, making them difficult to unlock. Once removed, act on a clip located under the arm and slide the wiper support downwards. Holding the support with the rubber facing you, lift the plastic tab on the right side of the support and pull out the wiper blade. After inserting the new blade by sliding it into the appropriate guide, reposition the support on the arm, ensuring the clip is securely locked. Replace the cap and you're done!

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Wiper Blades on a Honda Civic
Replacing the Front Wiper Blades on a Honda Civic
Honda Civic (2006-2012 / MK 8) If the wiper blades are not working, it’s best to replace them as soon as possible. Lift the wiper arm with the blade, detach the blade (unlock and p…
How to Replace the Windscreen Wiper Motor on the Honda Civic
How to Replace the Windscreen Wiper Motor on the Honda Civic
Honda Civic (2006-2012 / MK 8) This guide shows you how to remove and replace the windscreen wiper motor on the Honda Civic. The disassembly process is very simple; first, open the…
How to Replace the Wiper Blades on a Honda Civic?
How to Replace the Wiper Blades on a Honda Civic?
Honda Civic (2016-2021 / MK 10) To replace the wiper blades on a Honda Civic, lift the arms and the respective blades so that they do not touch the windscreen. Position the blade ve…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos