Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : Windscreen wipers

Honda Civic - Windscreen wipers

Honda Civic (2016-2021 / MK 10)
How do you replace the wiper blades on the Honda Civic?
In order to replace the wiper blades of the Honda Civic, you need to lift the arms and the relative brushes, so that they do not touch the windshield. By …read all…
Posted on 11 December 2022 by ScegliAuto
Honda Civic (2006-2012 / MK 8)
Replacing the front wiper on Honda Civic
If the wiper blades no longer work, it is best to replace them as soon as possible. Lift the arm with the wiper blade, detach it (unlock and pull the blade) …read all…
Posted on 29 November 2023 by ScegliAuto
Honda Civic (2001-2006 / MK 7)
Wiper blade replacement
To replace the wiper blade we will act on it first by removing the cap present at the junction of the support with the arm itself. Sometimes this operation can …read all…
Posted on 20 July 2023 by ScegliAuto
Airbags (7) Shock absorbers (9) Car stereo (7) Battery (13) Coil (3) Air Vents (1) Bushings (3) Arm (4) Spark plugs (11) Glow plugs (2) Bodywork (6) Control unit (5) Key (14) Timing belt (2) V-belt (1) Air conditioning controls (1) -board computer (21) Checks and maintenance (48) Dashboard (2) Gearshift gaiter (1) Drive shaft boot (1) Bearing (5) Rear bench seat (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (14) Cabin air filter (15) Petrol filter (3) Oil filter (2) Hand brake (3) Clutch (4) Grille (1) Injectors (1) Window lift switch (1) Accessory Kit (24) Xenon headlight kit (3) Light bulb (10) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (6) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Dashboard light (3) License plate light (1) Third brake light (1) Handle (9) Muffler (2) Engine (2) Window motor (3) Starter motor (5) Gear oil (3) Engine oil (21) Power steering oil (1) Door panel (17) Front bumper (9) Rear bumper (2) Brake pads (4) Tires (10) Gear Shift Knob (2) Pump (2) Fuel pump (3) Door (4) Window lift button (1) Instrument cluster (20) Radiator (3) Wheel (3) Fuse box (15) Seat (3) Drive shaft (4) Brake system (1) Suspensions (3) Outside rearview mirror (7) Manufacturer's coat of arms (2) Engine mount (2) Drums and shoes (2) Windscreen wipers (3) Thermostat (1) Transmission (1) Valve (1) EGR valve (3) Interior blower (3) Side window (2) Steering wheel (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos