Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. CR-V
    4. : How to replace low beam bulbs in Toyota CR-V?

Honda CR-V - Video tutorial

Model: Honda CR-V MK 5 - Years 2017-2022
Part: Headlight bulb
Operation: How to replace low beam bulbs in Toyota CR-V?

Replacing the low beam bulbs in the Honda CR-V is a very simple and fast operation, in this tutorial we can see how to proceed. First of all, let's get some good replacement bulbs, preferably the LED type as they provide a lot of light with low consumption, then make sure that the key is not inserted and open the engine hood. To remove a light bulb, we disconnect the power connector by pressing the relative clip and rotate it counterclockwise by about 90 degrees. Finally, we insert the replacement bulb, rotate it clockwise and reconnect the connector.


Posted on 16 April 2024 by ScegliAuto



How to replace a headlight bulb on Honda Cr V
Honda CR-V (2017-2022 / MK 5) In order to replace a bulb in the car's front light, the following steps must be followed: open the bonnet, identify the light containing the bulb to
How to replace the rear headlight bulb of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Let's briefly see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Honda CR-V. First of all, move t
Replace the internal led bulbs on Honda CR V 2009
Honda CR-V (2007-2012 / MK 3) If your Honda CR-V mk3 interior ceiling light bulbs are gone or you just want to replace them with brighter led bulbs, you are in the right tutorial.

Other guides that may interest you

    Frequently Asked Questions

    • Cr V 2007-2012 - What is the position light bulb of the Honda Cr-v? Read Answer

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos