Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Headlight bulb

Honda CR-V - Headlight bulb

Honda CR-V (2002-2007 / MK 2)
How to replace the headlight bulb of a Honda CR V.
The steps to replace the front headlight bulb of the Honda CR V mk2 model are very simple to do independently. The first step is to open the front hood. The …read all…
Posted on 3 January 2024 by ScegliAuto
Honda CR-V (2017-2022 / MK 5)
Replacement of the front headlight bulb of the Honda CR-V
Today's guide will show us the steps that will allow us to disassemble and replace the headlight bulb of the Honda CR-V. First of all, we open the car's engine …read all…
Posted on 29 November 2023 by ScegliAuto
Honda CR-V (2012-2017 / MK 4)
How to replace the headlight bulb on a Honda CR-V.
If we intend to replace a headlight bulb DIY style on this car model, we have provided the steps and procedures for the replacement below. After opening the …read all…
Posted on 29 April 2023 by ScegliAuto
Honda CR-V (2017-2022 / MK 5)
How to replace low beam bulbs in Toyota CR-V?
Replacing the low beam bulbs in the Honda CR-V is a very simple and fast operation, in this tutorial we can see how to proceed. First of all, let's get some …read all…
Posted on 16 April 2024 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to replace the headlight bulb on a Honda CR-V
Before starting, we will have to go to open the front hood of our Honda CR-V. So let's start by disconnecting the bulb connector. After that, we will have to …read all…
Posted on 2 February 2024 by ScegliAuto
Honda CR-V (2012-2017 / MK 4)
Honda CR-V headlight bulb replacement
In this video tutorial we will see how to remove and replace the headlight bulb of a Honda CR-V. First we open the car's bonnet from the inside and put the …read all…
Posted on 25 December 2023 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Honda CR-V headlight bulb replacement
In this video tutorial we will see how to replace the headlight bulbs of a Honda CR-V. First we open the bonnet and locate the rear part of the headlight: …read all…
Posted on 14 December 2023 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to replace Honda CR-V headlight bulb
Replacing the Honda CR-V headlight bulb is really simple since there is enough room for maneuver in the engine compartment; therefore, once the front hood has …read all…
Posted on 24 September 2023 by ScegliAuto
Airbags (2) Shock absorbers (7) Antenna (1) Car stereo (19) Anti roll bar (2) Roof Rack Bars (3) Battery (10) Coil (1) Arm (6) Spark plugs (4) Bodywork (10) Wheel rim (1) Key (14) Locking the trunk (1) Timing belt (4) -board computer (20) Checks and maintenance (49) Dashboard (5) Gearshift gaiter (1) Bearing (2) Mass air flow sensor (2) Differential (2) Brake discs (4) Headlight (8) Tail light (4) Fog lights (5) Air filter (14) Cabin air filter (14) Petrol filter (2) Diesel filter (5) Oil filter (4) Grille (2) Accessory Kit (20) Light bulb (9) Headlight bulb (8) Rear light bulb (2) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (2) License plate light (4) Third brake light (2) Handle (2) Muffler (1) Engine (1) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (13) Door panel (7) Windshield (1) Front bumper (3) Rear bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (9) Gear Shift Knob (2) Pump (4) Fuel pump (2) Push button (2) Instrument cluster (16) Radiator (3) Passenger compartment heating radiator (1) Fuse box (12) Seat (1) Crankshaft RPM sensor (2) Parking sensors (2) Lock (1) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (12) Engine head (3) Transmission (1) Central tunnel (1) Valve (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos