Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Heater core

Honda CR-V - Heater core

Heater Core Honda CR-V (2007-2012 / mk 3)

Honda CR-V (2007-2012 / MK 3)
Replacing the Heating Resistor Block
Under the glove compartment on the passenger side, there is a black plastic cover secured with clips. Simply pull this black panel down to remove it. Near the …Read all…
Posted on 6 March 2026 by ScegliAuto
Airbag (2) Shocks (6) Antenna (1) Car stereo (12) Anti-roll bar (2) Roof rack bars (3) Battery (8) Ignition coil (1) Control arm (6) Spark plugs (6) Body (14) Control unit (1) Wheel rim (1) Key (27) Trunk lock (1) Timing belt (4) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Dashboard (5) Shifter boot (1) Bearing (2) MAF sensor (3) Differential (2) Brake rotors (4) Headlight (8) Tail light (5) Fog lights (6) Air filter (15) Cabin air filter (14) Fuel filter (2) Diesel fuel filter (5) Oil filter (4) Grille (2) Accessory kit (17) Light bulb (9) Headlight bulb (13) Tail light bulb (4) Interior dome light bulb (5) Antifreeze coolant (3) Instrument panel light (2) License plate light (6) (2) Handle (2) Exhaust muffler (1) Engine (1) Power window motor (1) Starter motor (2) Transmission fluid (2) Engine oil (10) Clock (14) Door trim panel (10) Windshield (1) Front bumper (3) Rear bumper (2) Brake pads (3) Hydraulic pistons (1) Shift knob (2) Pump (4) Fuel pump (2) Car door (1) Push button (2) Power window switch (1) Instrument cluster (3) Radiator (3) Heater core (1) Fuse box (27) Seat (2) Crankshaft position sensor (3) Parking sensors (2) Door lock (1) Suspension system (1) Side mirror (7) Rearview mirror (3) AdBlue warning light (1) Warning light – error code (33) (119) Tire pressure warning light (18) Service warning light (81) Manufacturer emblem (1) Windshield wipers (13) Cylinder head (3) Drivetrain (1) Center console tunnel (1) Valve (2) EGR valve (2) Blower motor (1) Side window (1) Steering wheel (6)

How to replace the gear knob in the Peugeot 3008?

In this tutorial, see how to replace the gear knob in the Peugeot 3008, a very simple and quick operation. First, enter the cabin, then using a plastic spatula, unclip the base of the gaiter by prying along the perimeter. Next, lift the gaiter itself, disconnect the indicated connector and pull the knob off the shaft with force upwards. At this point, simply cut the retaining strap, attach the replacement to the gaiter with a new strap and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos