Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Outside rearview mirror

Honda CR-V - Outside rearview mirror

Honda CR-V (2017-2022 / MK 5)
Honda CR-V wing mirror replacement
Let's find out together how to disassemble and replace the external rear view mirror of the Honda CR-V, in simple and quick steps. First we open the front door …read all…
Posted on 26 May 2023 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to replace the rear view mirror on the Honda CR-V?
In order to replace the rear view mirror of the Honda CR-V you must first remove the door panel, by unscrewing the screws located at the internal handle and …read all…
Posted on 18 June 2022 by ScegliAuto
Honda CR-V (2002-2007 / MK 2)
Honda CR-V exterior mirror replacement
We see below the instructions necessary to disassemble and replace the Honda CR-V external rearview mirror. First of all, we open the front door and start …read all…
Posted on 19 May 2022 by ScegliAuto
Honda CR-V (2012-2017 / MK 4)
How to replace the Honda CR-V exterior mirror
Let's find out in this guide how to disassemble and replace the exterior rearview mirror of the Honda CR-V, following these simple and quick steps. First we …read all…
Posted on 16 April 2024 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How do you replace the exterior rearview mirror on the Honda CR-V?
In order to replace the rear view mirror of the Honda CR-V, you need to remove the triangular cover located above the door panel, in correspondence with the …read all…
Posted on 5 April 2024 by ScegliAuto
Honda CR-V (2012-2017 / MK 4)
How to replace the outside rearview mirror on Honda CR-V MK4 (2013)
Today we will see the steps to disassemble and replace the exterior rearview mirror on the fourth series Honda CR-V, in simple and quick steps. First we open …read all…
Posted on 21 March 2024 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Replacing the mirror on Honda Cr V
Mirror damaged and to be replaced on Honda Cr V? Let's see how you change inside the mirror. With a plastic lever we go to pry between the perimeter of the …read all…
Posted on 30 November 2023 by ScegliAuto
Airbags (2) Shock absorbers (7) Antenna (1) Car stereo (19) Anti roll bar (2) Roof Rack Bars (3) Battery (10) Coil (1) Arm (6) Spark plugs (4) Bodywork (10) Wheel rim (1) Key (14) Locking the trunk (1) Timing belt (4) -board computer (20) Checks and maintenance (49) Dashboard (5) Gearshift gaiter (1) Bearing (2) Mass air flow sensor (2) Differential (2) Brake discs (4) Headlight (8) Tail light (4) Fog lights (5) Air filter (14) Cabin air filter (14) Petrol filter (2) Diesel filter (5) Oil filter (4) Grille (2) Accessory Kit (20) Light bulb (9) Headlight bulb (8) Rear light bulb (2) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (2) License plate light (4) Third brake light (2) Handle (2) Muffler (1) Engine (1) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (13) Door panel (7) Windshield (1) Front bumper (3) Rear bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (9) Gear Shift Knob (2) Pump (4) Fuel pump (2) Push button (2) Instrument cluster (16) Radiator (3) Passenger compartment heating radiator (1) Fuse box (12) Seat (1) Crankshaft RPM sensor (2) Parking sensors (2) Lock (1) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (12) Engine head (3) Transmission (1) Central tunnel (1) Valve (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos