Honda CR-V - Bearing
Bearing Honda CR-V (2012-2017 / mk 4)
Bearing Honda CR-V (1995-2001 / mk 1)
Airbag (2)
Shocks (6)
Antenna (1)
Car stereo (12)
Anti-roll bar (2)
Roof rack bars (3)
Battery (8)
Ignition coil (1)
Control arm (6)
Spark plugs (6)
Body (14)
Control unit (1)
Wheel rim (1)
Key (27)
Trunk lock (1)
Timing belt (4)
Air conditioner (1)
Onboard computer (3)
Checks and maintenance (14)
Dashboard (5)
Shifter boot (1)
Bearing (2)
MAF sensor (3)
Differential (2)
Brake rotors (4)
Headlight (8)
Tail light (5)
Fog lights (6)
Air filter (15)
Cabin air filter (14)
Fuel filter (2)
Diesel fuel filter (5)
Oil filter (4)
Grille (2)
Accessory kit (17)
Light bulb (9)
Headlight bulb (13)
Tail light bulb (4)
Interior dome light bulb (5)
Antifreeze coolant (3)
Instrument panel light (2)
License plate light (6)
(2)
Handle (2)
Exhaust muffler (1)
Engine (1)
Power window motor (1)
Starter motor (2)
Transmission fluid (2)
Engine oil (10)
Clock (14)
Door trim panel (10)
Windshield (1)
Front bumper (3)
Rear bumper (2)
Brake pads (3)
Hydraulic pistons (1)
Shift knob (2)
Pump (4)
Fuel pump (2)
Car door (1)
Push button (2)
Power window switch (1)
Instrument cluster (3)
Radiator (3)
Heater core (1)
Fuse box (27)
Seat (2)
Crankshaft position sensor (3)
Parking sensors (2)
Door lock (1)
Suspension system (1)
Side mirror (7)
Rearview mirror (3)
AdBlue warning light (1)
Warning light – error code (33)
(119)
Tire pressure warning light (18)
Service warning light (81)
Manufacturer emblem (1)
Windshield wipers (13)
Cylinder head (3)
Drivetrain (1)
Center console tunnel (1)
Valve (2)
EGR valve (2)
Blower motor (1)
Side window (1)
Steering wheel (6)
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.
Watch the video!
by ScegliAuto
More videos
|