Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Stabiliser Bar Support Bush

Model: Honda CR-V MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Bearing

See other generations:
Video tutorial

The failure of the stabiliser bar support bush is a common fault, especially in SUVs. The replacement is straightforward but it is advisable to lift the vehicle on a ramp to unscrew the fixing bolts of the bush's mounting bracket. Once the 'U' bracket is removed, slide out the old bush and insert the new one in the correct position.

Complete the installation by repositioning the bracket and tightening the respective fixing bolts. It is recommended to replace both bushes of the bar, not just one.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacement of Anti-Roll Bar Drop Links
Replacement of Anti-Roll Bar Drop Links
Honda CR-V (1995-2001 / MK 1) If the vehicle is stiff and has lowered on the rear side, the problem lies with the torsion bar or its support, so obtain replacement parts and proce…
How to Replace the Wiper Blade Rubber on a Honda CR-V
How to Replace the Wiper Blade Rubber on a Honda CR-V
Honda CR-V (2017-2022 / MK 5) This tutorial video shows how to replace the rubber of the rear wiper blade on a Honda CR-V by following a few simple steps that will allow you to ma…
Replacement of Front Suspension Link
Honda CR-V (1995-2001 / MK 1) The link connects the anti-roll bar to the front suspension arm and consists of a metal rod with two ball joints at its ends: due to the significant …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos