Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Anti-Roll Bar Drop Links

Model: Honda CR-V MK 1 - Years 1995-2001
Part: Anti-roll bar

If the vehicle is stiff and has lowered on the rear side, the problem lies with the torsion bar or its support, so obtain replacement parts and proceed with the replacement. Lift the vehicle, secure it, and remove the wheel. To remove the drop links that keep the bar under tension, raise the wheel with a hydraulic jack or another safe method to relieve the tension on the bar, then unscrew the bolts securing the drop link. While keeping the vehicle in this position, install the new arm, ensuring to grease the joints.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (1995-2001 / MK 1) The failure of the stabiliser bar support bush is a common fault, especially in SUVs. The replacement is straightforward but it is advisable to lift …
Honda CR-V (2012-2017 / MK 4) Replacing the fog light on a CR-V? Here’s how to remove the fog light from the front bumper. Remove the fog light cover plastics using a trim removal…
Honda CR-V (2017-2022 / MK 5) After many hours of use, the battery in your Honda CR-V key may completely run out, necessitating a replacement. To do this, first remove the physica…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos