Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Reinstall the Lower Splash Guard

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Body

To remove and reinstall the lower splash guard, you will need to use a lift to raise the vehicle for better access and to easily locate all the screws and bolts securing the guard to the car. At this point, proceed to remove them (you may notice that some are unfortunately a bit worn from rust). You can then remove the guard itself. To reinstall it, simply reposition it and align all the holes where the screws need to be reinserted.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Honda CR-V
Replacing Spark Plugs on Honda CR-V
Honda CR-V (2012-2017 / MK 4) Is the car having ignition problems? Let's look at replacing the spark plugs on the Honda CR-V. Open the bonnet and lift it, securing it in place. Re…
How to Install a Spoiler on the Lower Part of the Rear Bumper
How to Install a Spoiler on the Lower Part of the Rear Bumper
Honda CR-V (2012-2017 / MK 4) Here’s how to install a trim on the lower bumper of the Honda CR-V. It’s important to specify that this is just an aesthetic trim that adds a particu…
How to Install a Tow Bar on a Honda CR-V
How to Install a Tow Bar on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) In today's video, we will see the guide to install a tow bar on the Honda CR-V in simple steps. First, move to the rear of your vehicle and start ins…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos