Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Control arm

Honda CR-V - Control arm

Control Arm Honda CR-V (2007-2012 / mk 3)

Honda CR-V (2007-2012 / MK 3)
Replacing the Front Control Arm on a Honda CR-V
To replace the front control arm on the Honda CR-V, proceed as follows: 1) Lift the vehicle using suitable jacks. 2) Remove the front wheel. 3) Remove the …Read all…
Posted on 9 March 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to Replace an Outer Tie Rod End
First, remove the wheel. Loosen the nut located between the tie rod and the steering rack boot. Then, remove the clip located behind the brake disc at the …Read all…
Posted on 8 March 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Replacing and Changing the Wishbones of a Vehicle
In this tutorial, describe how to remove worn wishbones and replace them with new ones. Before starting, lift the vehicle on a ramp and spray the worn and …Read all…
Posted on 6 March 2026 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to Replace the Front Lower Arm
Position the car on a ramp and lift it to a height that allows you to work underneath. Locate the position of the front arm and undo the 4 bolts securing its …Read all…
Posted on 1 March 2026 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
Replacement of the Steering Rack Tie Rod
Before proceeding with the disassembly operations, it is advisable to obtain a ball joint separator necessary to remove the tie rod end from its seat. Lift the …Read all…
Posted on 14 February 2026 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
Replacement of Front Suspension Link
The link connects the anti-roll bar to the front suspension arm and consists of a metal rod with two ball joints at its ends: due to the significant stresses …Read all…
Posted on 14 February 2026 by ScegliAuto

Control Arm Honda CR-V (1995-2001 / mk 1)

Honda CR-V (2007-2012 / MK 3)
Replacing the Front Control Arm on a Honda CR-V
To replace the front control arm on the Honda CR-V, proceed as follows: 1) Lift the vehicle using suitable jacks. 2) Remove the front wheel. 3) Remove the …Read all…
Posted on 9 March 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to Replace an Outer Tie Rod End
First, remove the wheel. Loosen the nut located between the tie rod and the steering rack boot. Then, remove the clip located behind the brake disc at the …Read all…
Posted on 8 March 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Replacing and Changing the Wishbones of a Vehicle
In this tutorial, describe how to remove worn wishbones and replace them with new ones. Before starting, lift the vehicle on a ramp and spray the worn and …Read all…
Posted on 6 March 2026 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to Replace the Front Lower Arm
Position the car on a ramp and lift it to a height that allows you to work underneath. Locate the position of the front arm and undo the 4 bolts securing its …Read all…
Posted on 1 March 2026 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
Replacement of the Steering Rack Tie Rod
Before proceeding with the disassembly operations, it is advisable to obtain a ball joint separator necessary to remove the tie rod end from its seat. Lift the …Read all…
Posted on 14 February 2026 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
Replacement of Front Suspension Link
The link connects the anti-roll bar to the front suspension arm and consists of a metal rod with two ball joints at its ends: due to the significant stresses …Read all…
Posted on 14 February 2026 by ScegliAuto
Airbag (2) Shocks (6) Antenna (1) Car stereo (12) Anti-roll bar (2) Roof rack bars (3) Battery (8) Ignition coil (1) Control arm (6) Spark plugs (6) Body (14) Control unit (1) Wheel rim (1) Key (27) Trunk lock (1) Timing belt (4) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Dashboard (5) Shifter boot (1) Bearing (2) MAF sensor (3) Differential (2) Brake rotors (4) Headlight (8) Tail light (5) Fog lights (6) Air filter (15) Cabin air filter (14) Fuel filter (2) Diesel fuel filter (5) Oil filter (4) Grille (2) Accessory kit (17) Light bulb (9) Headlight bulb (13) Tail light bulb (4) Interior dome light bulb (5) Antifreeze coolant (3) Instrument panel light (2) License plate light (6) (2) Handle (2) Exhaust muffler (1) Engine (1) Power window motor (1) Starter motor (2) Transmission fluid (2) Engine oil (10) Clock (14) Door trim panel (10) Windshield (1) Front bumper (3) Rear bumper (2) Brake pads (3) Hydraulic pistons (1) Shift knob (2) Pump (4) Fuel pump (2) Car door (1) Push button (2) Power window switch (1) Instrument cluster (3) Radiator (3) Heater core (1) Fuse box (27) Seat (2) Crankshaft position sensor (3) Parking sensors (2) Door lock (1) Suspension system (1) Side mirror (7) Rearview mirror (3) AdBlue warning light (1) Warning light – error code (33) (119) Tire pressure warning light (18) Service warning light (81) Manufacturer emblem (1) Windshield wipers (13) Cylinder head (3) Drivetrain (1) Center console tunnel (1) Valve (2) EGR valve (2) Blower motor (1) Side window (1) Steering wheel (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos