Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Diesel filter

Honda CR-V - Diesel filter

Honda CR-V (2002-2007 / MK 2)
Where is the Honda CR-V fuel filter located?
The Honda CR-V diesel filter is located in the lower part of the machine: to access it, you will need to lift the vehicle to locate the piece in question in …read all…
Posted on 11 June 2023 by ScegliAuto
Honda CR-V (2012-2017 / MK 4)
How to replace the Honda CR-V diesel filter?
The replacement of the Honda CR-V diesel filter is done by lifting the car, so that you can have easier access to the components in the lower part of the …read all…
Posted on 19 September 2022 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to replace the Honda CR-V diesel filter?
In order to replace the Honda CR-V diesel filter, the hood must be opened to access the inside of the engine compartment, where the filter is located. This …read all…
Posted on 31 July 2022 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
Honda Cr-V MK1 fuel filter replacement
In this video tutorial we will see how to remove and replace the first series Honda Cr-V fuel filter, in simple steps. First we open the bonnet of our car and …read all…
Posted on 29 June 2022 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Removing the diesel filter on Honda Cr V
Disassembly of the diesel filter on a Honda Cr V, let's see how it is disassembled. We raise the front engine hood, we identify the diesel filter as in the …read all…
Posted on 3 December 2023 by ScegliAuto
Airbags (2) Shock absorbers (7) Antenna (1) Car stereo (19) Anti roll bar (2) Roof Rack Bars (3) Battery (10) Coil (1) Arm (6) Spark plugs (4) Bodywork (10) Wheel rim (1) Key (14) Locking the trunk (1) Timing belt (4) -board computer (20) Checks and maintenance (49) Dashboard (5) Gearshift gaiter (1) Bearing (2) Mass air flow sensor (2) Differential (2) Brake discs (4) Headlight (8) Tail light (4) Fog lights (5) Air filter (14) Cabin air filter (14) Petrol filter (2) Diesel filter (5) Oil filter (4) Grille (2) Accessory Kit (20) Light bulb (9) Headlight bulb (8) Rear light bulb (2) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (2) License plate light (4) Third brake light (2) Handle (2) Muffler (1) Engine (1) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (13) Door panel (7) Windshield (1) Front bumper (3) Rear bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (9) Gear Shift Knob (2) Pump (4) Fuel pump (2) Push button (2) Instrument cluster (16) Radiator (3) Passenger compartment heating radiator (1) Fuse box (12) Seat (1) Crankshaft RPM sensor (2) Parking sensors (2) Lock (1) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (12) Engine head (3) Transmission (1) Central tunnel (1) Valve (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos