Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Parking sensors

Honda CR-V - Parking sensors

Parking Sensors Honda CR-V (2007-2012 / mk 3)

Honda CR-V (2007-2012 / MK 3)
Installation of Parking Sensors
The installation of parking sensors requires the removal of the rear bumper: start by removing the internal covers of the boot to access the bumper fastening …Read all…
Posted on 11 February 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to Install the Control Unit and Parking Sensors
This video shows how to fit parking sensors to the rear of a Honda CR-V. The first part of the video shows (in fast motion) how to remove all the interior …Read all…
Posted on 7 February 2026 by ScegliAuto
Airbag (2) Shocks (6) Antenna (1) Car stereo (12) Anti-roll bar (2) Roof rack bars (3) Battery (8) Ignition coil (1) Control arm (6) Spark plugs (6) Body (14) Control unit (1) Wheel rim (1) Key (27) Trunk lock (1) Timing belt (4) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Dashboard (5) Shifter boot (1) Bearing (2) MAF sensor (3) Differential (2) Brake rotors (4) Headlight (8) Tail light (5) Fog lights (6) Air filter (15) Cabin air filter (14) Fuel filter (2) Diesel fuel filter (5) Oil filter (4) Grille (2) Accessory kit (17) Light bulb (9) Headlight bulb (13) Tail light bulb (4) Interior dome light bulb (5) Antifreeze coolant (3) Instrument panel light (2) License plate light (6) (2) Handle (2) Exhaust muffler (1) Engine (1) Power window motor (1) Starter motor (2) Transmission fluid (2) Engine oil (10) Clock (14) Door trim panel (10) Windshield (1) Front bumper (3) Rear bumper (2) Brake pads (3) Hydraulic pistons (1) Shift knob (2) Pump (4) Fuel pump (2) Car door (1) Push button (2) Power window switch (1) Instrument cluster (3) Radiator (3) Heater core (1) Fuse box (27) Seat (2) Crankshaft position sensor (3) Parking sensors (2) Door lock (1) Suspension system (1) Side mirror (7) Rearview mirror (3) AdBlue warning light (1) Warning light – error code (33) (119) Tire pressure warning light (18) Service warning light (81) Manufacturer emblem (1) Windshield wipers (13) Cylinder head (3) Drivetrain (1) Center console tunnel (1) Valve (2) EGR valve (2) Blower motor (1) Side window (1) Steering wheel (6)

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos