Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Shock absorbers

Honda CR-V - Shock absorbers

Honda CR-V (2007-2012 / MK 3)
How do you replace the front shock absorber on a Honda CR-V?
In order to replace the front shock absorber of the Honda CR-V you have to go and lift the car, so that the corresponding wheel is not in contact with the …read all…
Posted on 19 May 2023 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Change the hood rod? Simple! Here's how to do it.
An element as banal as it is essential to guarantee the correct execution of the opening and closing operations of the front bonnet is the rod which acts as a …read all…
Posted on 30 September 2023 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to remove the shock absorbers on a Honda Cr V
This video explains how to remove the rear shock absorber of a Honda Cr V. We fold down the rear seats of the car and remove the plastic cover near the seat …read all…
Posted on 26 September 2023 by ScegliAuto
Honda CR-V (2002-2007 / MK 2)
Replacement of car shock absorbers
The main purpose of the shock absorbers is to cushion the disconnections of the road surface but also to maintain contact between the road and the tires so as …read all…
Posted on 25 July 2023 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to install new shock absorbers
Shock absorbers are used to ensure a smooth ride. After the vehicle has traveled a lot of kilometers, they can suffer wear. First the machine is lifted off the …read all…
Posted on 24 July 2023 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to install a new rear shock absorber
In this video an old shock absorber is removed and replaced from a Honda Cr-v. The rear wheel is removed from the car after being lifted onto a bridge. It is …read all…
Posted on 22 July 2023 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
How to install the rear shock absorbers
Shock absorbers in a vehicle are needed to ensure a smoother ride and after traveling a total of miles they wear out and need to be replaced. This guide shows …read all…
Posted on 22 July 2023 by ScegliAuto
Airbags (2) Shock absorbers (7) Antenna (1) Car stereo (19) Anti roll bar (2) Roof Rack Bars (3) Battery (10) Coil (1) Arm (6) Spark plugs (4) Bodywork (10) Wheel rim (1) Key (14) Locking the trunk (1) Timing belt (4) -board computer (20) Checks and maintenance (49) Dashboard (5) Gearshift gaiter (1) Bearing (2) Mass air flow sensor (2) Differential (2) Brake discs (4) Headlight (8) Tail light (4) Fog lights (5) Air filter (14) Cabin air filter (14) Petrol filter (2) Diesel filter (5) Oil filter (4) Grille (2) Accessory Kit (20) Light bulb (9) Headlight bulb (8) Rear light bulb (2) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (2) License plate light (4) Third brake light (2) Handle (2) Muffler (1) Engine (1) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (13) Door panel (7) Windshield (1) Front bumper (3) Rear bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (9) Gear Shift Knob (2) Pump (4) Fuel pump (2) Push button (2) Instrument cluster (16) Radiator (3) Passenger compartment heating radiator (1) Fuse box (12) Seat (1) Crankshaft RPM sensor (2) Parking sensors (2) Lock (1) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (12) Engine head (3) Transmission (1) Central tunnel (1) Valve (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos