Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Shock Absorbers

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Shocks

The main purpose of shock absorbers is to cushion the bumps in the road while maintaining contact between the road and the tyres to keep the vehicle on track. Typically, they should be replaced every 37,000 to 62,000 miles with normal driving. Each time you change them, it is also necessary to realign the tracking and camber as the vehicle's setup changes. A person with good manual skills and the right tools can replace them themselves. You must compress the springs before opening the spring/shock absorber compartment. Additionally, tighten all the fixing bolts to the correct torque; if they are too tight, they risk damaging the components, while if they are too loose, they may come undone and create handling issues.

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Install New Shock Absorbers
Honda CR-V (1995-2001 / MK 1) Shock absorbers are used to ensure a smooth ride. After the vehicle has covered many miles, they may wear out. First, lift the car off the ground, lo…
How to Install Rear Shock Absorbers
Honda CR-V (1995-2001 / MK 1) Shock absorbers in a vehicle are necessary for ensuring a smoother ride, and after a certain mileage, they wear out and need replacing. This guide sh…
How to reset the tire pressure light on a 2007 Honda CR-V
How to reset the tire pressure light on a 2007 Honda CR-V
Honda CR-V (2007-2012 / MK 3) If you notice the appearance of the orange tire pressure warning light on the instrument panel of your 2007 Honda CR V, it means that there is a punc…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos