Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Pump

Honda CR-V - Pump

Honda CR-V (2007-2012 / MK 3)
How to replace the fuel pump on a Honda CR-V.
In this video we will find out how to replace the fuel pump in our Honda CR-V. First we need to go to the fuse box under the dashboard (near the pedals) and …read all…
Posted on 25 June 2022 by ScegliAuto
Honda CR-V (2002-2007 / MK 2)
Removing the water pump on Honda Cr-V
Many do not know which parts must be removed before disassembling the water pump, so today we will tell you. Taking a 2006 Honda Cr-V as an example, before …read all…
Posted on 29 January 2024 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
Replacement of the windshield wiper pump on Honda Crv
Doesn't water come out of the windshield wipers anymore? Let's see how to disassemble the operating pump of the wiper chamber. We lift the front hood and …read all…
Posted on 28 January 2024 by ScegliAuto
Honda CR-V (1995-2001 / MK 1)
Fuel pump motor replacement
If, when the ignition is switched on, you do not hear the typical hiss of the petrol pump coming from under the rear seat and the car does not start, it is …read all…
Posted on 26 July 2023 by ScegliAuto
Airbags (2) Shock absorbers (7) Antenna (1) Car stereo (19) Anti roll bar (2) Roof Rack Bars (3) Battery (10) Coil (1) Arm (6) Spark plugs (4) Bodywork (10) Wheel rim (1) Key (14) Locking the trunk (1) Timing belt (4) -board computer (20) Checks and maintenance (49) Dashboard (5) Gearshift gaiter (1) Bearing (2) Mass air flow sensor (2) Differential (2) Brake discs (4) Headlight (8) Tail light (4) Fog lights (5) Air filter (14) Cabin air filter (14) Petrol filter (2) Diesel filter (5) Oil filter (4) Grille (2) Accessory Kit (20) Light bulb (9) Headlight bulb (8) Rear light bulb (2) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (2) License plate light (4) Third brake light (2) Handle (2) Muffler (1) Engine (1) Window motor (1) Starter motor (1) Gear oil (2) Engine oil (13) Door panel (7) Windshield (1) Front bumper (3) Rear bumper (1) Brake pads (3) Hydraulic pistons (1) Tires (9) Gear Shift Knob (2) Pump (4) Fuel pump (2) Push button (2) Instrument cluster (16) Radiator (3) Passenger compartment heating radiator (1) Fuse box (12) Seat (1) Crankshaft RPM sensor (2) Parking sensors (2) Lock (1) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (12) Engine head (3) Transmission (1) Central tunnel (1) Valve (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos