Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Water Pump on Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Pump

See other generations:
Video tutorial

Many do not know which parts need to be removed before taking off the water pump, so today we will tell you. Taking a 2006 Honda CR-V as an example, before removing the water pump, you must remove the tensioner, engine mount, and steering: removing the last two is not mandatory but gives you more room to manoeuvre when taking off the water pump.

Before doing this, remember to drain the circulating fluid.

As for replacing the pump, it is simply secured by six bolts, three at the top and three at the bottom.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Removing the Timing Belt on a Honda CR-V
Removing the Timing Belt on a Honda CR-V
Honda CR-V (1995-2001 / MK 1) In this video, we will see how to remove the timing belt on a Honda CR-V. Lift the car on a column lift (if necessary, remove the front wheel with a …
Replacing the Windscreen Wiper Pump on Honda CR-V
Replacing the Windscreen Wiper Pump on Honda CR-V
Honda CR-V (2007-2012 / MK 3) Is water no longer coming from the wipers? Learn how to remove the pump of the windscreen washer reservoir. Lift the front bonnet and remove the bump…
How to Remove the Fuel Pump from a Honda CR-V
How to Remove the Fuel Pump from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Follow these steps to remove and replace the fuel pump on a Honda CR-V. First, open the rear doors and remove the rear seat. Take off the plastic cov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos