Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Mount on the Honda Fit

Model: Honda Fit GE - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine mount

See other generations:
Video tutorial

In this video tutorial, you will see the guide that will allow you to remove and replace the engine mount on the Honda Fit in simple and quick steps. First, open the hood and locate the engine mount, which is found on the left; then, lift the engine from below, subsequently unscrewing the two bolts of the engine mount (using a socket wrench with an extension) to remove it, as shown in the video.

At this point, install the new engine mount using the original replacement; tighten the bolts to the proper torque!


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in the Honda Fit
How to Replace the Air Filter in the Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) In this quick guide, discover how to replace the air filter in your Honda Fit (2013-2019). This same procedure also applies to all Honda Jazz models …
How to Reset the Service Light on a Honda Fit?
How to Reset the Service Light on a Honda Fit?
Honda Fit (2007-2012 / GE) To make the Service light disappear from the instrument cluster of the Honda Fit, first insert the ignition key to turn on the cluster: then press an…
How to Replace the Headlight Bulbs in a Honda Fit?
How to Replace the Headlight Bulbs in a Honda Fit?
Honda Fit (2007-2012 / GE) In this tutorial, you will see how to replace the headlight bulbs in a Honda Fit, a very simple and quick operation. First, make sure the key is not …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos