Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Engine Mount on a Honda Civic

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine mount

See other generations:
Video tutorial

In this brief and simple guide, learn the procedure to remove and replace the engine mount on a Honda Civic. First, lift the vehicle and support the engine with a jack; then open the bonnet and move the fuel filter out of the way to access the engine mount, as shown in the video.

At this point, disconnect the various wiring and remove the screws from the engine mount using a socket wrench with an extension; remove the mount and replace it with the new one, following the video until the end!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) In this guide, follow the instructions to remove and replace the front engine mount on your Honda Civic. First, open the bonnet and begin to lift the…
Honda Civic (2006-2012 / MK 8) In this tutorial, you will see how to remove the EGR valve on a Honda Civic, a very simple and quick operation to perform if you need to replace or t…
Honda Civic (2016-2021 / MK 10) If you want to completely replace the front headlight bulb of your Honda Civic by yourself, then the following guide is all you need. First of all, g…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos