Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Honda Fit?

Model: Honda Fit GE - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the headlight bulbs in a Honda Fit, a very simple and quick operation. First, make sure the key is not in the ignition for safety.

Then, open the hood, locate the large cap at the back of the headlight, and remove it. Next, disconnect the power connector, unclip the metal retaining clip, and pull out the old bulb from the housing. At this point, simply insert the new bulb and reassemble everything by following the reverse procedure.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulbs on the Honda Fit
Replacing the Headlight Bulbs on the Honda Fit
Honda Fit (2007-2012 / GE) Today's instructions will show you how to disassemble and replace the headlight bulbs on the Honda Fit, following these simple steps. First, to acces…
How to Replace the Front Headlight of the Honda FIT
How to Replace the Front Headlight of the Honda FIT
Honda Fit (2007-2012 / GE) Follow this guide to learn how to remove and replace the front headlight of the Honda FIT by following the instructions below. First, open the hood o…
How to Replace the Headlight on a Honda Fit
How to Replace the Headlight on a Honda Fit
Honda Fit (2020-2026 / GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2) Today, you will learn how to replace the left front headlight on a Honda Fit. Start by opening the hood and removing the upper front bumper. To remov…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos