Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on the Honda Fit

Model: Honda Fit GE - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

Today's instructions will show you how to disassemble and replace the headlight bulbs on the Honda Fit, following these simple steps. First, to access the headlight bulb, you need to remove the wheel well liner by unscrewing the fastening screws; then remove the bulb cover located at the back of the headlight assembly, as shown in the video.

At this point, disconnect the electrical connector and release the metal clip to remove and replace the bulb with a new one that has the same base!


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs in a Honda Fit?
How to Replace the Headlight Bulbs in a Honda Fit?
Honda Fit (2007-2012 / GE) In this tutorial, you will see how to replace the headlight bulbs in a Honda Fit, a very simple and quick operation. First, make sure the key is not …
How to Replace the Tail Lights on the Honda Fit?
How to Replace the Tail Lights on the Honda Fit?
Honda Fit (2020-2026 / GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2) Replacing the tail lights on the Honda Fit is done through a specific access point from inside the trunk. Therefore, there is no need to disassemble …
How to Remove the Front Headlight of a Honda Fit
How to Remove the Front Headlight of a Honda Fit
Honda Fit (2007-2012 / GE) In this guide, you will learn how to remove the front headlight of a Honda Fit, model produced from 2009 to 2013. Before removing the headlight, you …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos