Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb of the Honda FIT

Model: Honda Fit GK6, GK7, GK5, GK4, GH7, GP5, GP6, GK3 - Years 2013-2019
Part: Headlight bulb

Briefly, we will see the steps to remove and replace the low beam bulb of the front headlight of the Honda FIT. First, open the hood of the vehicle and start by removing the plastic protective cover of the bulb. Then, disconnect the electrical connector of the light and unhook the metal clip to remove it, as shown in the video. At this point, install the new bulb of the correct type (in this case, H4); connect it and check its proper operation, finally securing the plastic cover.

Posted on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb of the Honda Fit
Replacing the Headlight Bulb of the Honda Fit
Honda Fit (2007-2012 / GE) In this guide, you will see the steps to remove and replace the headlight bulb of the Honda Fit. First, move to the side of the vehicle, accessing th…
Replacement of the front headlight bulbs of the Honda Fit
Replacement of the front headlight bulbs of the Honda Fit
Honda Fit (2007-2012 / GE) Today's instructions will show us how to disassemble and replace the headlight bulbs of the Honda Fit, following these simple steps. First of all, in…
How to replace the front headlight bulb of the Honda Fit 2012
How to replace the front headlight bulb of the Honda Fit 2012
Honda Fit (2007-2012 / GE) Replacing the front headlight bulb of your second generation Honda Fit (2012) is really simple and you can complete the operation by following the st…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos