Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of a Honda Fit

Model: Honda Fit GE - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

In this guide, you will learn how to remove the front headlight of a Honda Fit, model produced from 2009 to 2013. Before removing the headlight, you must take off the radiator grille by detaching its plastic clips, and then also remove the front bumper as shown in the video.

Once that is done, you can remove the front headlight by unscrewing its four screws that hold it in place with a 10mm socket wrench, two located on the top of the headlight and two on the bottom.

Finally, just pull out the headlight, disconnect the bulb wiring, and remove it completely.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Honda Fit
Replacing the Headlight Bulb of the Honda Fit
Honda Fit (2007-2012 / GE) In this guide, you will see the steps to remove and replace the headlight bulb of the Honda Fit. First, move to the side of the vehicle, accessing th…
How to Replace the Headlight on a Honda Fit
How to Replace the Headlight on a Honda Fit
Honda Fit (2020-2026 / GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2) Today, you will learn how to replace the left front headlight on a Honda Fit. Start by opening the hood and removing the upper front bumper. To remov…
How to Replace the Front Headlight of the Honda FIT
How to Replace the Front Headlight of the Honda FIT
Honda Fit (2007-2012 / GE) Follow this guide to learn how to remove and replace the front headlight of the Honda FIT by following the instructions below. First, open the hood o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos