Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Honda FIT

Model: Honda Fit GE - Years 2007-2012
Part: Headlight

Follow this guide to learn how to remove and replace the front headlight of the Honda FIT by following the instructions below. First, open the hood of your car and start removing the front bumper; to do this, remove the various clips found above and below the front bumper, as shown in the video. Once the bumper is removed, you can unscrew the mounting screws of the headlight using a 10 mm socket wrench, disconnecting the electrical connector of the bulbs; then remove and replace the headlight assembly with the new one!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb of the Honda Fit
Replacing the Headlight Bulb of the Honda Fit
Honda Fit (2007-2012 / GE) In this guide, you will see the steps to remove and replace the headlight bulb of the Honda Fit. First, move to the side of the vehicle, accessing th…
How to replace the front headlight bulb of the Honda Fit 2012
How to replace the front headlight bulb of the Honda Fit 2012
Honda Fit (2007-2012 / GE) Replacing the front headlight bulb of your second generation Honda Fit (2012) is really simple and you can complete the operation by following the st…
Replacement of the front headlight bulbs of the Honda Fit
Replacement of the front headlight bulbs of the Honda Fit
Honda Fit (2007-2012 / GE) Today's instructions will show us how to disassemble and replace the headlight bulbs of the Honda Fit, following these simple steps. First of all, in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos