Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Fit
    4. : How to replace the headlight of the Honda Fit

Honda Fit - Video tutorial

Model: Honda Fit GR2, GS1, GR9, GR8, GR7, GR5, GR3, GR1, GR6, GR4 - Years 2020-2024
Part: Headlight
Operation: How to replace the headlight of the Honda Fit

Today we will explain how to replace the left front headlight of the Honda Fit. We start by removing the headlight by opening the hood and removing the upper front bumper. To remove the upper bumper, it is necessary to remove all the fastening pins and then disconnect the headlight from the inside by removing the connector. We continue the removal by releasing the side bumper and removing the screws that hold the headlight, in order to extract it. Once the headlight is removed, we can remove the light fixture and replace the bulbs inside. We reconnect the headlight with the new bulbs and reattach the side bumper, connect the headlight to the car and tighten it. We mount the upper bumper and close the hood.


Posted on 17 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos