Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on the Honda Fit

Model: Honda Fit GK6, GK7, GK5, GK4, GH7, GP5, GP6, GK3 - Years 2013-2019
Part: Front bumper

Today, we will see in this video tutorial how to remove and replace the front bumper on the Honda Fit in simple and quick steps. First, raise the vehicle and begin removing the fastening screws located underneath and above the front bumper; then remove the lower splash shield as shown in the video. At this point, unscrew the additional screws located on both sides of the front wheel wells, releasing the bumper from the sides; remove and replace the entire front bumper with the new one, applying the reverse procedure of disassembly!

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight of the Honda FIT
How to Replace the Front Headlight of the Honda FIT
Honda Fit (2007-2012 / GE) Follow this guide to learn how to remove and replace the front headlight of the Honda FIT by following the instructions below. First, open the hood o…
How to Replace the Headlight on a Honda Fit
How to Replace the Headlight on a Honda Fit
Honda Fit (2020-2026 / GR8, GR2, GR4, GR5, GR6, GR1, GR7, GR9, GS1, GR3) Today, you will learn how to replace the left front headlight on a Honda Fit. Start by opening the hood and removing the upper front bumper. To remov…
How to remove the front headlight of a Honda Fit
How to remove the front headlight of a Honda Fit
Honda Fit (2007-2012 / GE) In today's guide, we are shown how to remove the front headlight of a Honda Fit, model produced from 2009 to 2013. Before removing the headlight, we …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos