Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on the Honda Fit?

Model: Honda Fit GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Light bulb

See other generations:
Video tutorial

Replacing the tail lights on the Honda Fit is done through a specific access point from inside the trunk. Therefore, there is no need to disassemble the housing, which avoids the risk of damaging it during the process.

Once the rear hatch is open, you can use the car key or a flathead screwdriver to pry open the access cover for the bulbs on the side where you need to make the replacement. This way, you can extract the bulb holder you need, disconnecting the connector if necessary, and change the burnt-out bulb.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a 2012 Honda Fit
How to Replace the Headlight Bulb on a 2012 Honda Fit
Honda Fit (2007-2012 / GE) Replacing the headlight bulb on your 2012 Honda Fit is very simple, and you can complete the task by following the steps outlined in this mini guide.…
How to Replace the Headlight Bulbs in a Honda Fit?
How to Replace the Headlight Bulbs in a Honda Fit?
Honda Fit (2007-2012 / GE) In this tutorial, you will see how to replace the headlight bulbs in a Honda Fit, a very simple and quick operation. First, make sure the key is not …
Replacing the Headlight Bulb of the Honda Fit
Replacing the Headlight Bulb of the Honda Fit
Honda Fit (2007-2012 / GE) In this guide, you will see the steps to remove and replace the headlight bulb of the Honda Fit. First, move to the side of the vehicle, accessing th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos