Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. CR-V
    4. : How to disassemble the fuel pump of the Honda CR-V.

Honda CR-V - Video tutorial

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Fuel pump
Operation: How to disassemble the fuel pump of the Honda CR-V.

The main steps today will show us how to disassemble and replace the fuel pump of the Honda CR-V, following the instructions below. First, we open the rear doors and start removing the bench seat; we remove the plastic cover of the fuel pump and disconnect the fuel line and electrical connector, as shown in the video. At this point, we unscrew the pump nut to remove it and replace it with the new original one, making the connection; we reassemble the pump components and finally the rear bench seat!


Posted on 7 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos