Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in a Honda Civic?

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

In this tutorial, we will see how to replace the fuel pump in a Honda Civic, a very simple operation. First, remove the fuel pump relay, then start the engine and wait for it to stall, thus removing any traces of fuel in the system.

Next, go to the back of the vehicle, remove the seat of the rear bench, then remove the backrests and take out the cross support. At this point, simply open the large cap just freed, disconnect both the fuel lines and the power connector, unscrew the outer ring and extract the pump from the tank.

To install the replacement and reassemble everything, just follow the reverse procedure.


Posted on 2 June 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from Honda Civic
Removing the Fuel Pump from Honda Civic
Honda Civic (2006-2012 / MK 8) In this video tutorial, learn how to remove and replace the fuel pump on a Honda Civic. First, open the boot and remove the screws from the seats at …
How to Replace the Fuel Pump in a Honda Civic?
How to Replace the Fuel Pump in a Honda Civic?
Honda Civic (2001-2006 / MK 7) .. In this tutorial, you will see how to replace the fuel pump in a Honda Civic, a very simple and quick operation. First, ensure that.. …
Which Relay is for the Fuel Pump in the Honda Civic?
Which Relay is for the Fuel Pump in the Honda Civic?
Honda Civic (2001-2006 / MK 7) If the fuel pump in your Honda Civic has suddenly stopped working and the corresponding fuse is in good condition, first check the status of the rele…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos