Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Honda
  4. :
  5. Civic
  6. : How to disassemble the clutch master cylinder of a Honda Civic

Honda Civic - Video tutorial

Model: Honda Civic MK 5 - Years 1992-1995
Part: Pump
Operation: How to disassemble the clutch master cylinder of a Honda Civic

Before we can begin, we will have to go and open the driver's door of our Honda Civic. So let's start by disengaging and removing the cover placed near the pedal board. After that, we will have to disconnect the hoses connected to the pump, first carrying out the regular bleeding of the system. Once this is done, we will have to unscrew the nut that fixes the clutch pedal pin. At this point, we will have to unscrew and remove the bolts that secure the clutch pump. When we have completed this step, we will be able to remove the pump itself, and we will have completed this step.


Posted on 22 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos