Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on a Honda Civic

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Pump

See other generations:
Video tutorial

In this guide, remove and replace the clutch pump or master cylinder on your Honda Civic. First, open the bonnet of your car and start by removing the battery.

You will find the clutch pump located at the bottom right of the engine bay, as shown in the video. Next, unscrew the fastening screws and disconnect the pump pin. Then, remove the brake fluid reservoir pipe along with the master cylinder.

Replace the component with the new one and reassemble everything!


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Remove the Clutch Pump from a Honda Civic
How to Remove the Clutch Pump from a Honda Civic
Honda Civic (1992-1995 / MK 5) Before starting, open the driver's door of your Honda Civic. Begin by unhooking and removing the cover near the pedal area. Next, disconnect the hose…
How to Remove the Window Winder Handle on a Honda Civic
How to Remove the Window Winder Handle on a Honda Civic
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …
Where is the fuse box of the Honda Civic?
Where is the fuse box of the Honda Civic?
Honda Civic (2012-2015 / MK 9) Locating the fuses inside your Honda Civic (2012-2015) is straightforward and with the following guide, you will find them without any difficulty. Fi…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos