Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Fluid in the Honda S660

Model: Honda S660 MK 1 - Years 2015-2022
Part: Brake fluid

In today's tutorial video, you will learn how to bleed and top off the brake fluid in the Honda S660, following the instructions below. First, raise the vehicle and remove the front wheel; then, remove the cap from the bleed valve, connecting a small hose to it. At this point, press the brake pedal a couple of times to bleed the system, allowing the fluid to drain into a container; then close the valve and pour the fluid into the designated brake fluid reservoir, filling it to the maximum line!

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Honda S660?
How to Change the Engine Oil in a Honda S660?
Honda S660 (2015-2022 / MK 1) To change the engine oil, position yourself under the car. It's best to have the vehicle raised on a lift or suitable jack stands. The oil pan and fi…
How to Perform an Oil Change and Oil Filter Replacement on the Honda S660
How to Perform an Oil Change and Oil Filter Replacement on the Honda S660
Honda S660 (2015-2022 / MK 1) Follow this guide to perform routine maintenance on your Honda S660 by changing the engine oil and oil filter. First, lift the vehicle and start by l…
Guide to Removing the Battery from the Honda S660
Guide to Removing the Battery from the Honda S660
Honda S660 (2015-2022 / MK 1) In this guide, discover the location of the battery and how to replace it in the Honda S660. First, open the hood of your car and start by removing t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos