Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Honda S660

Model: Honda S660 MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuel pump

Video tutorial

To replace the fuel pump on a Honda S660, lift the vehicle to access the components underneath. Here, at the rear, unscrew the screws securing the fuel tank protection panels so that the tank can be removed after freeing it from the supports and connectors.

Now, unscrew the screws that secure the fuel pump at the top to remove it from inside the tank. Then, you can install a new replacement part, reassembling all the components that were removed earlier.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank and Fuel Pump of the Honda S660
How to Remove the Fuel Tank and Fuel Pump of the Honda S660
Honda S660 (2015-2022 / MK 1) In this brief guide, you will see the main steps to remove and replace the fuel tank and fuel pump of the Honda S660. First, open the hood and remove…
How to Replace the Brake Fluid in the Honda S660
How to Replace the Brake Fluid in the Honda S660
Honda S660 (2015-2022 / MK 1) In today's tutorial video, you will learn how to bleed and top off the brake fluid in the Honda S660, following the instructions below. First, raise …
How to Replace the Key Fob Battery for Honda S660
How to Replace the Key Fob Battery for Honda S660
Honda S660 (2015-2022 / MK 1) Replacing the battery in the Honda S660 key fob is an extremely simple and quick task. Here’s how to proceed in this tutorial. You will only need a r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos