Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the power steering pump in the Honda Accord?

Model: Honda Accord MK 8 - Years 2008-2013
Part: Pump

In this tutorial we can see how to replace the power steering pump in the Honda Accord, a very simple operation. First of all, make sure the engine is cold, then open the hood and remove the cover. Next, grab the tensioner with a 14mm socket wrench, loosen the tension by moving it and remove the drive belt. Then unscrew the mounting bolts of the pump, separate it from the engine, disconnect the two tubes and quickly connect them to the new pump, being careful not to spill too much fluid. At this point, all that remains is to reassemble everything, start the engine, turn the steering wheel right and left for a few minutes, and top up the amount of fluid lost during the operation.

Posted on 22 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the power steering pump in the Honda Accord?
How to replace the power steering pump in the Honda Accord?
Honda Accord (2002-2007 / MK 7) .. In this tutorial we can see how to replace the power steering pump in the Honda Accord, a simple operation but one that requires.. …
How to Replace the Windscreen Wiper Pump on Honda Accord
How to Replace the Windscreen Wiper Pump on Honda Accord
Honda Accord (1998-2002 / MK 6) Is the windscreen wiper pump not working anymore? Let’s see how to remove the pump from the reservoir of a Honda Accord. Lift the front bonnet and re…
How to replace the fuel pump in the Honda Accord?
How to replace the fuel pump in the Honda Accord?
Honda Accord (1998-2002 / MK 6) In this tutorial, we can see how to replace the fuel pump in the Honda Accord, an extremely simple and quick operation. First of all, make sure the k…

Other guides you may be interested in

How to Open the Hood of a Porsche Without a Battery

To open the hood of a Porsche, you need to use the command on the key. In this guide, you will learn how to open the hood when the battery is dead. First, obtain a jump starter or another battery. Connect the cables to your jump starter/battery and attach them to your Porsche; the red (positive) cable should be connected to the designated terminal found in the cabin: to the left of the pedals, there is a cover that, when opened, provides access to the positive terminal (the red support, which must be pulled outwards, to which the clamp is attached). The black cable of the negative terminal should be connected to a metal part of the body (usually a metal part of the door hinge). At this point, you can use the remote to open the hood and recharge or replace the battery.

Watch the video!


by ScegliAuto

More videos