Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Power Steering Pump on Honda Accord

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Pump

See other generations:
Video tutorial

Before starting maintenance, remove the drive belt. For this, refer to other tutorials.

Prepare a small container under the joint between the hose and the pump, as shown in the video, because first, you need to disconnect that hose. To do this, slide off the clip and disconnect the fitting using a pair of pliers.

Collect the small amount of fluid that comes out, then disconnect the high-pressure hose by unscrewing the two 10 mm bolts on the pump and the single 10 mm bolt at the other end, on the valve. At this point, you can extract the pump and unscrew the bolts that hold it in place.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to replace the power steering pump in the Honda Accord?
How to replace the power steering pump in the Honda Accord?
Honda Accord (2002-2007 / MK 7) In this tutorial we can see how to replace the power steering pump in the Honda Accord, a simple operation but one that requires good manual dexterit…
How to replace the power steering pump in the Honda Accord?
How to replace the power steering pump in the Honda Accord?
Honda Accord (2008-2013 / MK 8) In this tutorial we can see how to replace the power steering pump in the Honda Accord, a very simple operation. First of all, make sure the engine i…
Replacement of Power Steering Pump
Honda Accord (2002-2007 / MK 7) The power steering pump is located on the left side of the engine bay (when facing the front), near the windscreen washer fluid reservoir. Start by r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos