Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Power Steering Pump

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Steering wheel

See other generations:
This video is currently unavailable

The power steering pump is located on the left side of the engine bay (when facing the front), near the windscreen washer fluid reservoir. Start by removing the drive belt from the pump; use a hose clamp on the oil return pipe to prevent leakage after disconnecting it from the pump by loosening the relevant clip; then remove the high-pressure pipe and the pump's mounting bolts (move the oil reservoir to facilitate removal); proceed in reverse for the installation of the new pump, ensuring the pipes are connected correctly and check the oil level.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Power Steering Pump on Honda Accord
Replacing the Power Steering Pump on Honda Accord
Honda Accord (2002-2007 / MK 7) Before starting maintenance, remove the drive belt. For this, refer to other tutorials. Prepare a small container under the joint between the hose an…
Removing the Timing Belt
Honda Accord (1998-2002 / MK 6) The timing belt is one of the most worn parts in a car; failing to replace it when necessary can have serious repercussions on the engine's health. A…
Replacement of Front Floor Mats
Replacement of Front Floor Mats
Honda Accord (2002-2007 / MK 7) Replacing the floor mats may be necessary if they are damaged or very dirty. Obtain the appropriate mats for your vehicle. The replacement process is…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos