Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Wiper Pump on Honda Accord

Model: Honda Accord MK 6 - Years 1998-2002
Part: Pump

Is the windscreen wiper pump not working anymore? Let’s see how to remove the pump from the reservoir of a Honda Accord. Lift the front bonnet and remove the bumper to access the wiper reservoir. Once the front bumper is removed, undo the securing screws around the pump, disconnect the power connector, and pull it out from its housing. Remove all components from inside the wiper reservoir. Fit the new part in the engine bay, secure it to the water reservoir, and reconnect the power connector. Test the proper functioning of the wiper pump: operate the control levers.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Wipers on the Honda Accord
Replacing the Front Wipers on the Honda Accord
Honda Accord (2002-2007 / MK 7) This guide shows you how to remove and replace the front wipers on the Honda Accord, following the instructions below. First, move to the outside of …
How to Replace the Fuel Pump in a Honda Accord?
How to Replace the Fuel Pump in a Honda Accord?
Honda Accord (1998-2002 / MK 6) In this tutorial, see how to replace the fuel pump in a Honda Accord, a very simple and quick operation. First, ensure the key is not in the ignition…
How to replace the power steering pump in the Honda Accord?
How to replace the power steering pump in the Honda Accord?
Honda Accord (2002-2007 / MK 7) In this tutorial we can see how to replace the power steering pump in the Honda Accord, a simple operation but one that requires good manual dexterit…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos