Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Indicator Stalk on Honda Accord

Model: Honda Accord MK 7 - Years 2002-2007
Part: Steering wheel

Pull the lever under the steering wheel to raise it. Once done, unscrew the two screws underneath the steering wheel, clearly shown in the video, using a cross-head screwdriver. Remove the upper rear cover from the steering wheel with the help of a small flat screwdriver. Also, remove the lower part of this plastic (along with this, you need to take off the dashboard part that frames the lower steering wheel). At this point, you can access the screws securing the two steering rods, unscrew them, disconnect their connectors, and remove them. Proceed in reverse for reassembly.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator Fan on a Honda Accord
How to Replace the Radiator Fan on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you start, open the bonnet of your Honda Accord. Begin by disconnecting the hoses connected to the radiator fan, then unplug the electrical co…
How to Replace the Window Switch on a Honda Accord
How to Replace the Window Switch on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you can start, open the front door of your Honda Accord. Begin by prising out and lifting the window switch panel using a flathead screwdriver…
How to Replace the Windscreen Wiper Pump on Honda Accord
How to Replace the Windscreen Wiper Pump on Honda Accord
Honda Accord (1998-2002 / MK 6) Is the windscreen wiper pump not working anymore? Let’s see how to remove the pump from the reservoir of a Honda Accord. Lift the front bonnet and re…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos