Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : Removing the center console display

Honda Accord - Video tutorial

Model: Honda Accord MK 8 - Years 2008-2013
Part: Dashboard
Operation: Removing the center console display

Before proceeding with the disassembly operations, it is advisable to disconnect the negative pole of the battery. Using a plastic lever, remove the center tunnel trim bars; unscrew the fixing screws of the glove compartment positioned immediately in front of the gear lever and remove it; then unscrew the fixing pins below. Still using the plastic lever, remove the air vent and the trim of the central dashboard panel, immediately behind the steering wheel; at this point unscrew the fixing screws of the instrument panel. Then unhook the cover immediately above the car radio, unscrew the screws below and remove the car radio by disconnecting the relative sockets. Then unscrew the screws along the upper edge of the central display and remove the trim of the instrument panel and the central display itself: at this point unscrew the fixing screws of the display and remove it from its seat by pulling it forward and disconnecting the sockets.


Posted on 30 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos