Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Honda Accord?

Model: Honda Accord MK 7 - Years 2002-2007
Part: Instrument cluster

In this tutorial, you will learn how to remove the instrument cluster on a Honda Accord, a very simple and quick operation. First, ensure that the key is not inserted, then lower the steering wheel as much as possible, locate the two screws on the upper area and remove them. Next, carefully pry off the outer trim using a plastic spatula to avoid leaving any marks, and remove the additional screws indicated. At this point, simply extract the instrument cluster from the dashboard, disconnect the connector, and fit the replacement if necessary.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2006 Honda Accord
How to reset the oil light on the 2006 Honda Accord
Honda Accord (2002-2007 / MK 7) To manually reset the engine oil light on the instrument panel display of your 2006 Honda Accord, simply follow the guide below and apply all the ste…
How to Reset the Maintenance Light on a 2008 Honda Accord
How to Reset the Maintenance Light on a 2008 Honda Accord
Honda Accord (2012-2017 / MK 9) If you own a 2008 Honda Accord and want to know how to manually reset the maintenance light, follow this simple procedure. First, enter the vehicle a…
How do you reset the partial odometer of the Honda Accord?
How do you reset the partial odometer of the Honda Accord?
Honda Accord (2012-2017 / MK 9) To reset the partial odometer of the Honda Accord, you need to insert the ignition key into the ignition switch so that the instrument panel can be t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos