Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Honda S660?

Model: Honda S660 MK 1 - Years 2015-2022
Part: Engine oil

To change the engine oil, position yourself under the car. It's best to have the vehicle raised on a lift or suitable jack stands. The oil pan and filter are located very close together, so you won't need to move around much. You can remove and replace the filter while the oil pan drains. To empty the pan and the entire system of old oil, simply remove the drain plug and let all the fluid flow out before closing it up. Pour the new engine oil in through the front hood, using the designated filler neck.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Fluid in the Honda S660
How to Replace the Brake Fluid in the Honda S660
Honda S660 (2015-2022 / MK 1) In today's tutorial video, you will learn how to bleed and top off the brake fluid in the Honda S660, following the instructions below. First, raise …
How to Perform an Oil Change and Oil Filter Replacement on the Honda S660
How to Perform an Oil Change and Oil Filter Replacement on the Honda S660
Honda S660 (2015-2022 / MK 1) Follow this guide to perform routine maintenance on your Honda S660 by changing the engine oil and oil filter. First, lift the vehicle and start by l…
How to Replace the Spark Plugs on a Honda S660
How to Replace the Spark Plugs on a Honda S660
Honda S660 (2015-2022 / MK 1) Let's look at the necessary instructions to remove and replace the spark plugs of the Honda S660 engine in simple and quick steps. First, open the re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos